|Data||03 - 05, Aprile 2023|
Rochester, NY, USA The Gleason Works
1000 University Ave.
Rochester, NY 14607, USA
|Processo||Progettazione del software|
|Organizzatore||Gleason, KISSsoft AG|
|Durata del corso||3 days|
|Numero dei partecipanti||20|
KISSsoft Training (USA)
Gleason will host a 3-day, comprehensive KISSsoft Training Course at The Gleason Works Facility in Rochester, NY. Day 1 includes a general introduction to the KISSsoft Design Software and concludes with basics of cylindrical gear design, Day 2 continues with shaft and bearing design and selection, Day 3 will focus on advanced options including the analysis and optimization of transmissions. Trainers: Hanspeter Dinner, KISSsoft AG, Switzerland and Brian Stringer, KISSsoft USA.
Schedule and course content
All Class Times: 8:30 AM - 4:30 PM
Lunch: 11:30 AM - 12:30 PM
April 3, 2023:
Introduction, Cylindrical Gear Design
April 4, 2023:
Shafts and Bearings
April 5, 2023:
Cylindrical Gear Design, Analysis and Optimization
A certificate is issued with successful completion.
Pricing, Hotel and Preparations
The course fee of $1,800 per person includes beverages during the seminar and three lunches. Accommodation cost is not included in the course fee. Gleason has negotiated specific accommodation rates for course participants, located close to the Gleason premises. Participants will be required to bring a laptop (please see hardware requirements below), KISSsoft will electronically provide test licenses and training materials prior to the training.
To run the program, you require the following computer configuration: Windows 64-bit, Windows 8.1 and higher, Windows N and KN require the installation of Microsoft Media Feature Pack, Windows servers require the installation of Microsoft Media Foundation, Processor at least compatible with SSE2, RAM at least 4 GByte RAM, Screen resolution at least 1280 x 960 pixels, OpenGL 3.2, Windows printer, Memory -hard disk approximately 800 – 3000 MB (depending on extent and requirements).
Registration and Class Size
For registration please use the electronic registration form (Add to Cart). Please provide details of all participants and contact information for billing purposes. We will respond with an order confirmation as your proof for attendance. The class size will be limited to 20, first come, first serve. The deadline to register is 3/17/23.
Gleason has negotiated specific accommodation rates for course participants, located close to the Gleason premises:
Courtyard by Marriott Rochester Downtown
384 East Avenue, Rochester NY 14607
$139.00, incl. free parking, use Code “GL9”
Hilton Garden Inn Rochester Downtown
155 East Main Street, Rochester, NY 14604
$129.00, ask for Gleason Rate
The Strathallan Hotel
550 East Avenue, Rochester, NY 14607
$149.00, incl. free parking, ask for Gleason Rate