Workholding Maintenance Set
Gleason Tooling Number: On request

Preventative maintenance of workholding equipment is crucial to ensure longetivity and a high level of functionality. To assist in the maintenance, Gleason provides a local care set which consists of gloves, abrasive pad, cleaning spray and special lubricant. Note: Versions can vary from country and region as this set is not shipped internationally.

Workholding Transport and Protection Device
Gleason Tooling Number: On request (ETO)

Our protective devices for transport, storage and rest reliably protect the clamping device. They are manufactured in the same basic dimensions as the component to be clamped in the clamping area and are marked with the signal color red for visualization.

QFP Clamping Wrench
Gleason Tooling Number: 1832183 (155 mm), 1832184 (185 mm), 1832185 (275 mm)

Gleason Quik-Flex^® Plus clamping wrench releases and clamps the upper module. Accurate and easy torque adjustment with a fixed value, with audible and tactile release when the tightening value is reached. Available in 3 standard sizes, depending on the size of your QFP unit.

Clamping Head Changing Fixtures
Gleason Tooling Number: see list below

With this changeover device, you can easily and safely insert and remove the expansion chuck into/from the clamping device. A clamping head change fixture is required for changeover.

Concentric Rings for LeCount^® Mandrels
Gleason Tooling Number: Depending on the model of mandrel

Concentric rings are specifically made for the inspection and qualification of Gleason LeCount^® mandrels. Inhouse rings allow the inspection to be done on a regular basis, saving time and money when utilized regularly at your facility. Concentric rings are accurate to 1.3µm from the inner diameter to the outer diameter.