Recontrolled Bevel Gear Grinding Machine with Immediate Delivery
| Status | Recontrolled Machine |
| Control | Fanuc 30iA CNC |
| Power Supply |
450V / 50/60Hz |
| Certification |
NFPA 79-1991 |
| Delivery |
3 Months (without coolant filtration system) |
| Location |
Rochester, New York, USA |
The image is for illustration purposes only. The actual machine may vary depending on features and functions.
Features
Electrical and hydraulic controls to NFPA 79-1991 specifications. This particular machine is equipped with powered access door, hydraulic workpiece chuck with drawrod.
New Fanuc 30iA CNC with Gleason HMI, storage capacities of 100 summaries, cycle fault monitoring. Work chamber lighting, hydraulic pressure test kit, heat exchanger for temperature control of the coolant system, coolant scavenger tank system with discharge pump and inlet valves.
Please note: coolant filtration system not included. If coolant system is required, delivery time will increase to roughly 5 months.
Technical Data
| Extreme ratio | 10:1 |
| Root angle rage (B-Axis) | -5 to 90° |
| Equivalent root angle range | -8 to 90° |
| Full depth, max. | 0.625" / 16.00 mm |
| Face width, max. | 1.600" / 40.65 mm |
| Range of tooth numbers | 5 to 200 incl. |
| Wheel diameters | 2.0" to 7.5" |
